Technology in Sports

It today’s world, sport cannot go together without technology. With the ever growing development of new technologies, they have always tried to be implemented into sports. Because technology can give sports something nothing else can, an unmistakable truth. Or so they say. Due to the fact that people are, well, people, they are bound to make mistakes. It is because we are human, we are not robots, that we can make mistakes, while robots make them only if they are malfunctioning. This is especially emphasized in sports, where human eyes can often deceive their owners, the referees most importantly, but also players, coaches and the fans. That is why these days there are many discussions about installing video technology into sports, mostly football. What does technology actually mean for sports?

Here I would like to emphasize that there are already sports using technology, like tennis and cricket, to name some. It helped the referees a lot, to minimize and correct some mistakes they make. But apparently, not all problems are solved like this. Players that have been playing for a longer period of time, and have not grown up with these kinds of technologies, are not convinced that it works properly. This suspicion is probably understandable, because when they were first starting their professional sports careers, they did not probably even dream about something like this would exist. But this technology has been tested time after time, and skeptical players, such as Roger Federer, have learned to live with it and accept it, although probably not so reluctantly.

This technology used in sports is called Hawk-Eye line-calling system, or just Hawk-eye for short. It was invented by a British computer expert Paul Hawkins. It is now used in tennis, where six or more cameras, situated around the court are linked together, track the path of the ball. Then those six or more cameras combine their separate views and make a 3D representation of the path of the ball. For tennis, or basically any other sport, this means that any close line call can be checked, quickly and accurately. This is not always used on tennis tournaments, though. For instance, the French Open is not using this technology because the tournament is played on clay courts and thus the print of the ball on the ground can easily be seen. Maybe this will change one day, because you can’t always be 100% sure you are looking at the right print.

These days there have been a lot of talks about introducing this technology to the sport of football. The sympathizers of this idea have been especially loud after the South Africa FIFA World Cup 2010, where a lot of mistakes by the referees have been made (an Argentina goal allowed although the player was offside, England goal not seen in a crucial moment). However, referees are only human, and they are bound to make mistakes because they can not help it, so i do not think all those critics were fair to them. On the other hand, a recent statement was made from the UEFA president Michel Platini, who is not thrilled about the goal-line technology, saying that this would reduce football to a video game. I don’t believe that other sports who have this technology have been reduced to a video game. Furthermore, he also admits that referees can make mistakes and that there are many cameras on the field that can catch any disputable moment. So why not help football, or any other sport, to see these disputable moments clearly and to resolve them without making mistakes. Or is it better to hear a mass of critics every time something like this happens? I am sure the referees would like this kind of help, then they couldn’t be blamed for anything and wouldn’t have to listen to all the nonsense people say about them the other day, or worse.

Food and Tea in China

Chinese food is a very popular type of food among American's and has become a favorite to many. With this in mind, many people consider going to China to experience the food directly from China. The food alone in China makes China a top travel destination. However, it is to be of no surprise that the Chinese food in China is very different from the Americanized Chinese food available within the United States.

The quality of rice available in China is much different than anywhere else across the globe. China has an abundance of rice fields, making rice readily available within the country. Rice is one of the main dishes in any Chinese meal.

There are several different locations in China to visit for various dishes you might like to try. Beijing is well-known for their Peking duck. However, Shanghai is famous for their pork buns. It is all dependent on what it is you are looking for as to what area of ​​China you would be pleased the most within your travels abroad to China.

However, some food customs in China are very different than anywhere an American traveler would be used to. In most parts of China, soups are served after the meal. However, the Cantonese do serve soup before the meal.

Aside from the Chinese food us Americans have grown to love China for, China is also famous for their tea. They are most famous for their jasmine and green tea. So, while in China, do not pass up the opportunity to taste their tea.

Lubrication of Domestic Clocks

Domestic clocks are one of the most ignored watches in the entire household. We make sure that our wrist watches are well maintained with good servicing, battery changes and of course lots of lubricating. But domestic watches are practically ignored till the battery runs down. Even then, we just replace the battery without getting any servicing or lubricating done on it. That means that the watch continues to run without any care or oiling till they finally expire and die! But just like wristwatches, domestic watches need to be maintained well too with regular cleaning and lubrication and care. Clocks are larger than wristwatches so a little too much lubrication is OK here.

But still there are rules to be followed in lubrication and care of clocks like-

* Try to use just a single drop of oil in the watch works to make the watch remain on time. These are bigger watches so they don’t really require you to be precise but it’s a good idea if you are. Carriage clocks require a smaller amount while long clocks and grandfather clocks require much more.

* Try not to scrape the oil pots while oiling watches as it scrapes up unnecessary settled grit into the workings of the clock. This is especially true of incalite pots. Use only fresh oil and discard any which has more than five years on the packing date on the seal; protect the oil you are using by storing it at room temperature and away from direct light. An ideal temperature would be about 15 to 20 C or as stated by the manufacturer of the clock. There are several points on a domestic clock where you can oil them and the oil will them spread to all over the clock workings. Good places to apply lubrication are at oils sinks or pivot holes, escapement pallet faces, weight pulley bearings and points of contact between different parts of the mechanism.

* Make sure you do clean the mainspring and refit the watch springs after you have oiled the domestic wall clocks. You can also apply heavy grade mineral oil around the edges of the barrel cap. Capillary action will make sure that the oil spreads all over the mechanism.

* Do not lubricate or oil pinion leaves and gear teeth, as they will slip while revolving. Another place to be careful of is the ratchet and the great wheel arbor in the main clock facings.

* The frequency of oiling depends on how frequently you use the clock and the location it is based in. Synthetic oils are very stable and do not deteriorate but non-synthetic oils do. The residue leaves a gummy deposit in the watch that can destroy a good watch.

* Contamination with dust will however really cause a tremendous amount of wear on the clock and that can damage the mechanism. Reapplication of oils is fine after the old one has been wiped off.

But do make sure that you do service the watch at least every two years to maintain optimum working conditions.

Overseas Manufacturing and Clearing Goods Through Customs

When importing into a country, there are a number of terms, regulations and procedures an importer should be familiar with. The following is a guide of different issues to be aware of when importing.

For first time importers, it is highly advisable to pay a customs broker to enter and clear goods through customs. Customs brokers are licensed by the countries in which they operate, and they act on behalf of the importer to file the necessary documents for products to enter a country at the port-of-entry. Depending on their relationship with their client, they may also pay customs duties and other importing expenses on their client's behalf. Finally, they advise importers about issues of which they may need to be aware such as country or origin marks and other issues importers need to be aware of.

When choosing a customs broker, the importer should first make sure they can enter goods at the arrival port. In the US, customs brokers are licensed by the US Customs and Border Protection Service.

Prior to placing an order with a manufacturer, the relevant nation's customs agency and the importer's customs broker should be consulted to avoid possible problems such as the following:

  • Any legal issues that may exist with the product in the country of import.
  • Finding out after the product arrives at port that the it is subject to import quotas.
  • Possible health, safety or other regulations which apply to the product to be imported.

One easy to avoid, but common problem encountered when importing is the failure to mark the product in compliance with country of origin regulations. To avoid this, contact the relevant customs agency of the nation where the merchandise will be imported to ensure the goods are in compliance. For example, custom laws in the US require each imported good be marked with the English name of the country of origin (eg China) as reasonably, indelibly, and permanently as the nature of the article permits. Furthermore, this marking must be visible to the ultimate purchaser of the product.

The tariff rate levied by customs must be paid before the importer can take possession of the goods. While tariff rates in countries like the US average around 5% for most products, they can be significantly higher for some goods, particularly those with higher labor content. Therefore, it is important to know the rate before product arrives at port.

Before the goods are shipped, ensure the packing regulations for the destination country have been adhered. For example, every box, bale or case may need to be numbered with the exact quantity in each.

Other regulations include the type of pallets that can be used.

Problems with customs clearance often center around paperwork. Different goods often require different types of documentation, but the three major types of documentation the shipper must prepare include the following:

1. A bill of lading: This document, issued by the carrier or shipper, is basically a receipt of the goods acknowledging that they have been received on the vessel for shipment. This document indicates the particular vessel on which the goods have been placed, the destination of the goods, and the terms for transporting the goods to their final destination.

2. A commercial invoice: This is used as a customs declaration by the entity that is exporting an item across international borders. This document is required by customs to determine the value of the goods to assess duties and taxes, and goods must be invoiced in a systematic manner.

3. Packing list: This document is an itemized detail of the merchandise in a particular shipment. A copy is usually attached to the outside of the shipping container or inside the container itself so the merchandise may be counted by the person opening it.

It is crucial to make sure these documents, and any others that may be needed for a particular shipment, are carefully completed and reviewed before the goods arrive.

To avoid excess storage fees, arrange for a freight forwarder or some other type of transporter to ship the goods to their final destination as soon as they have cleared customs.

Being aware of these points, as well working closely with customs and a customs broker, will make the importing process smoother and will reduce the possibility of unnecessary difficulty or expense.